Friday, June 3, 2011

Living in the digital TV age

My in-laws gave us an LCD HD-TV recently. I knew that we could get HD channels with an antenna, but I gave up after looking at antennas and trying to figure out which antenna we'd need. After a bit of searching, I found instructions on making an antenna out of coat hangers. Gradually, I scavenged all the parts I needed. I wanted this to be as low-budget as possible. The biggest expense was $7 for a gold-plated 75-ohm to 300-ohm matching transformer.



I assembled the antenna, plugged it in and crossed my fingers. My initial channel scan brought in 14 digital channels. I made a few adjustments, moved the antenna outside, ran the scan again and got 41 digital channels. Half the channels are in Spanish and there's a couple shopping channels. Just like basic cable, but free! We got all the important ones like PBS, FOX, CBS and ABC in beautiful HD. I haven't been able to get the local NBC affiliate for some reason. Not bad for an antenna that cost $10 to assemble.

1 comment:

  1. Hi,
    How far away can you pick up with it? What kind of parts do you need
    to get and how much does each cost? What measurement for the coat hanger and how
    far a part do they need to be to pick up uhf channels 65 miles and 100 mile ?
    What do the measurement have to be to pick up the higher vhf channels and what
    do the measurement need to be to pick up the lower vhf channels 65 miles and 100
    mile? Email me back with photos.


    Thanks,
    Varian

    ReplyDelete